3.2 AP模式AP Mode

3.2 AP模式

AP Mode

AP默认使用的瘦AP模式，AP模式下不能开启DHCP服务。

Select the working mode for your AP (“Fit AP”) mode is the default mode.DHCP service cannot be enabled in this mode.

1.瘦AP模式（默认模式），AP连接上级路由器，建议使用的模式，可配套AC控制器，具体方法参考网关的AC无线管理使用说明。

1. Fit AP Mode (Default Mode): The AP is connected to your router and will act as a wireless access point. For better performance and control options, you can connect to an AC controller. For further details, please refer to the AC wireless management indtructions of the gateway.

2.选择网络连接方式：支持动态IP（DHCP），静态IP，两种方式都会修改AP默认IP地址（192.168.2.1）。

2. Select the network protocol: Dynamic IP (DHCP) or static IP. Both of these methods will modify the default IP address of the AP.（192.168.2.1）.
   3.配置外网:可选择设置DNS。

3. WAN Configuration: Optionally set up DNS.

4.配置无线网络：修改SSID名称和加密方式，详细配置跳转至“无线设置“修改。

4.Wireless Configuration: Modify the SSID name and encryption mode, and jump to the “Wireless Settings” to modify the detailed configuration.

5.确认配置完成。

5. Confirm that the configuration is complete.

备注：如再次配置AP，需要登录已修改的IP地址，动态IP方式可通过上级路由的DHCP列表查看对应MAC终端IP（74:96:37: ** : ** : ** ），静态IP方式可登录设定IP地址。

Remark: Once the default IP of the AP has been changed, you will need to log-in with the newly assigned IP. In dynamic IP mode, the IP address of the MAC terminal can be viewed through the DHCP list of the upper layer route.（74:96:37: ** : ** : ** ）In static IP mode, you can log in and set an IP address.