9.4 连接看门狗 PING-WatchDog

9.4 连接看门狗

PING-WatchDog

开启功能，AP可进行线路检测，执行预设动作

After the function is enabled, the AP can perform line detection and perform preset actions.

1.看门狗监测地址：AP对该地址或域名进行PING测试

1. Watchdog Monitoring Address: AP performs PING test on the address or domain name.

2.检测间隔：Ping测试间隔时间（单位：秒）

2. Interval of checking: Ping test interval (Unit: Seconds).

3.失败次数：Ping检测连续失败次数后执行动作，建议值3次

3. Number of failures: Ping checks the number of consecutive failures and performs actions. The suggested value is 3 times.

4.Ping超时时间：一次Ping最大检测时间（单位：秒）

4. Ping Timeout: Maximum detection time of Ping (Unit: Seconds).

5.看门狗监测动作：

5. Watchdog Monitoring Action:

a.重启设备——设备软重启

a. Reboot the device - Device soft restart.

b.关闭无线——2.4G和5G无线信号关闭

b. Turn off wireless -2.4G and 5G wireless signals are turned off.

c.重启网络——重启有线网口

c. Reboot the network - Restart the wired network port.

d.开启救援SSID——增加无线救援SSID，

d. Open RESCUE SSID - Increase wireless RESCUE SSID.

名称格式：RESCUE_99_XXXX，

Name Format: RESCUE_ 99_ XXXX,

密码：99999999

Password: 99999999

e.无动作

e. No action.