11.Bandwidth Control

1.Bandwidth Control
Configuring port bandwidth is limiting the rate at which the physical interface receives data outward or inward.
Before the flow is sent from the interface, the speed limit is configured in the outgoing direction of the interface to control all the outgoing message flow.
Before the traffic is received from the interface, the speed limit is configured in the incoming direction of the interface to control all the incoming packet traffic.
Click on the navigation bar: Configure- -> Bandwidth control

** 2.Instance**
Networking requirements: limit the ingress and egress rate of port 1 to 2048 kbps, as shown in the figure below.



Download the file on the port 1 connection PC, open the Task Manager and click on Ethernet to display the receiving rate of 2.1Mbps as shown below