DHCP Network Connection Mode Setting (Automatically obtain the IP by the superior route).
Click the network interface to be modified, and select the interface type of outer network interface (WAN) mode.
MAC Address: The address of the interface, which can be replaced randomly.
Access Mode: Select DHCP
Obtain IPv6 Address: Disable or enable, recommended should be abled.
DHCPv6 Service: Select turn Off.
DNS Optional: For non-special cases, it is recommended to use DNS provided by local operators. Generally use 114.114.114.114 or 8.8.8.8.
Bandwidth: The uplink and downlink bandwidths of the WAN outlet are recommended to be choosen to exceed 1G bandwidth.
Loading Balancing Options: It can be divided according to the operator or custom set split and do not participate in the balance.
Link Detection Options: It can be filled in the detection URL for PING/HTTP/HTTP+PING to connection test.
Note: Check whether the MAC address of the network port is consistent. If there is consistency, the MAC address of the network port should be modified.
最后编辑:todaair01 更新时间:2023-12-13 10:19