4.7.3 Static IP Internet Access Mode

Static IP Internet Access Mode Settings (Static IP)

• Click the network port to be modified, select the internal type of outer network external (WAN) mode.

• MAC Address: The physical address of the network port

• Access Method: Select the static way.

• IP Address: Fill in the static IP address that can connect to the external network.

• Network Mask: Fill in the appropriate sub net mask.

• Gateway: Fill in the appropriate gateway IP address.

• IPv6 Address: Optional.

• DHCPv6 Service: Turn Off.

• DNS: For non-special cases, it is recommended to use the DNS provided by the local operator, generally 114.114.114.114 or 8.8.8.8.

• Bandwidth: Fill in the uplink bandwidth and downlink bandwidth of the WAN outlet.

• Load Balancing Options: It can be divided according to the operator or custom set split, or do not participate in the balance.

• Link Detection Options: It can be filled in the detection URL for PING/HTTP/HTTP+PING connection to the test.

Note: Check whether the MAC address of the network port is consistent. If there is consistency, the MAC address of the network port should be modified.