4 .7.4 PPPoE Dial-Up Mode Setting

4.7.4 PPPoE Dial-Up Mode Setting

• Click the network interface to be modified, and select the interface type of outer network interface (WAN) mode.

• MAC Address: The physical address of the network port.

• Access Mode: Choose the PPPoE mode.

• IPv6 Address: Select the automatically way.

• Broadband Account: Fill in the broadband account and password that provided by the operator.

• DHCPv6 Service: Select Off

• DNS: DNS: For non-special cases, it is recommended to use the DNS provided by the local operator, generally 114.114.114.114 or 8.8.8.8.

• Bandwidth: Fill in the uplink bandwidth and downlink bandwidth of the WAN outlet.

• Load Balancing Options: It can be divided according to the operator or custom set split, or do not participate in the balance.

• Link Detection Options: It can be filled in the detection url for PING/HTTP/HTTP+PING connection test.

Note: Check whether the MAC address of the network port is consistent or not. The MAC address of the network port should be modified that if there is consistency.