10.2.2 Advanced Configuration

Advanced Configuration

• Channel: We recommend to select auto adjustment after open AP channel will auto adjustment.

• Roaming Threshold: When wireless terminals up to setting AP number which will auto disconnect, and the terminal will roam to next AP. According to current environment adjustment, the recommend range -80 to -85.

• U-APSD Intelligent Power Saving: U-APSD is a new energy-saving processing mode, which can enhance the terminal energy-saving capacity. However, due to the problems in supporting U-APSD functions in some terminals, it is necessary to turn off U-APSD functions in this case.

• RTS/CTS Threshold: Resolve wireless data conflicts. When the data length exceeds this value, the wireless access point needs to send the RTS signal to the station, then receive the feedback from the station, before sending the data.The default is 2347.

• Signal: Wifi frequency default auto, the maximum power of the device, and the signal strength can be adjusted according to the site environment.

• Channel Bandwidth: Default is automatic, or according to current environment adjust to 20MHz.

• 5G First: When 2.4G and 5.8GWiFi are configured the same after opening, if AP supports 5.8G wireless terminal, it will connect 5GWIFI preferentially.

• WMM: When enabled, wireless multimedia data transmission performance can be improved, which is enabled by default.

• GBK SSID: Turning on GBK can solve the problem that some terminals (computers, etc.) display garbled Chinese wireless names.

• Black and White List: Wireless access black and white list. In white-list mode, only the MAC address in the white-list can access WiFi. In the black-list mode, only the MAC address in the black-list cannot access WiFi.