4.7.3 Static IP Internet Access Mode 静态 IP 上网模式设置

Static IP Internet Access Mode Settings (Static IP)

静态 IP 上网模式设置(Static IP)

• Click the network port to be modified, select the internal type of outer network external (WAN) mode.
• 点击需要修改的网口，接口类型选择外网接口（WAN）模式
• MAC Address: The physical address of the network port
• MAC 地址：网口的物理地址
• Access Method: Select the static way.
• 接入方式：选择 Static
• IP Address: Fill in the static IP address that can connect to the external network.
• IP 地址:填写可连接外网的静态 ip 地址
• Network Mask: Fill in the appropriate sub net mask.
• 网络掩码: 填相应的子网掩码
• Gateway: Fill in the appropriate gateway IP address.
• 网关: 填相应的网关 ip 地址
• IPv6 Address: Optional.
• IPv6 地址:选填
• DHCPv6 Service: Turn Off.
• DHCPv6 服务:选择关闭
• DNS: For non-special cases, it is recommended to use the DNS provided by the local operator, generally 114.114.114.114 or 8.8.8.8.
• DNS：非特殊情况建议使用当地运营商提供的 DNS，一般可用 114.114.114.114 或8.8.8.8
• Bandwidth: Fill in the uplink bandwidth and downlink bandwidth of the WAN outlet.
• 带宽：填写广域网出口的上行带宽、下行带宽
• Load Balancing Options: It can be divided according to the operator or custom set split, or do not participate in the balance.
• 负载均衡选择：可按运营商进行分流，或自定义设置分流，或不参与均衡
• Link Detection Options: It can be filled in the detection URL for PING/HTTP/HTTP+PING connection to the test.
• 链路检测选择：可填写检测的网址进行 PING/HTTP/HTTP+PING 连通测试

Note: Check whether the MAC address of the network port is consistent. If there is consistency, the MAC address of the network port should be modified.
注意 ：检查网口的 MAC 地址是否一致，如存在一致，应修改网口的不同 MAC 地址。