4 .7.4 PPPoE Dial-Up Mode Setting PPPoE 拨号上网模式设置

4.7.4 PPPoE Dial-Up Mode Setting

PPPoE 拨号上网模式设置

• Click the network interface to be modified, and select the interface type of outer network interface (WAN) mode.
• 点击需要修改的网口，接口类型选择外网接口（WAN）模式
• MAC Address: The physical address of the network port.
• MAC 地址：网口的物理地址
• Access Mode: Choose the PPPoE mode.
• 接入方式：选择 PPPoE
• IPv6 Address: Select the automatically way.
• 获取 IPv6 地址:选择自动
• Broadband Account: Fill in the broadband account and password that provided by the operator.
• 宽带账号：填写运营商提供的宽带账号和密码
• DHCPv6 Service: Select Off
• DHCPv6 服务: 选择关闭
• DNS: DNS: For non-special cases, it is recommended to use the DNS provided by the local operator, generally 114.114.114.114 or 8.8.8.8.
• DNS：非特殊情况建议使用当地运营商提供的 DNS，一般可用 114.114.114.114 或8.8.8.8
• Bandwidth: Fill in the uplink bandwidth and downlink bandwidth of the WAN outlet.
• 带宽：填写广域网出口的上行带宽、下行带宽
• Load Balancing Options: It can be divided according to the operator or custom set split, or do not participate in the balance.
• 负载均衡选择：可按运营商进行分流，或自定义设置分流，或不参与均衡
• Link Detection Options: It can be filled in the detection url for PING/HTTP/HTTP+PING connection test.
• 链路检测选择：可填写检测的网址进行 PING/HTTP/HTTP+PING 连通测试

Note: Check whether the MAC address of the network port is consistent or not. The MAC address of the network port should be modified that if there is consistency.
注意 ：检查网口的 MAC 地址是否一致，如存在一致，应修改网口的不同 MAC 地址。