1.Radio 无线电

• Radio Mode：射频的模式.

• Radio Mode: The mode of radio frequency.

• Channel Width：标识信号传输的数据传输能力.

Channel Width: Identify the data transmission capability of the signal transmission.

• Tx Power：发射端是描述做功快慢的物理量.

Tx Power: The emissivity is a physical quantity that describes how fast or slow work is done.

• Beacon Intval：SSID广播包发送的间距，用于客户端搜索无线路由之用，连接后还能检测路由器是否在线的设置.

Beacon Intval: SSID indicates the interval between broadcast packets. It is used by clients to search for wireless routes and to detect if a router is online after being connected.

• RTS Threshold：为了防止在AP范围内却不在同一范围内的无线节点互相发送信号导致冲突.

RTS Threshold: In order to prevent wireless nodes in the AP range but not in the same range from sending signals to each other, resulting in conflict.
• DTIM Intval：无线发送数据包的频率.

DTIM Intval: The frequency at which the packet is transmitted wirelessly.

• RTS Threshold：设备发射信号的距离（单位：km）.

RTS Threshold: The distance of the device to transmit the signal. (Unit: km)

• DTIM Intval：最大能连接的设备数.

DTIM Intval: The maximum number of connected devices.

• Disatnce Setting：在无线网络中，接收到的信号强度必须达到一定的阈值，才能被认定为弱信号.

Distance Setting: In a wireless network, the received signal must reach a certain threshold strength before it can be considered weak.