• Radio Mode: The mode of radio frequency.
    • Radio Mode：射频的模式.
  • Channel Width: Identify the data transmission capability of the signal transmission.
    • Channel Width：标识信号传输的数据传输能力.
  • Tx Power: The emissivity is a physical quantity that describes how fast or slow work is done.
    • Tx Power：发射端是描述做功快慢的物理量.
  • Beacon Intval: SSID indicates the interval between broadcast packets.It is used by clients to search for wireless routes and to detect if a router is online after being connected.
    • Beacon Intval：SSID广播包发送的间距，用于客户端搜索无线路由之用，连接后还能检测路由器是否在线的设置.
  • RTS Threshold: In order to prevent wireless nodes in the AP range but not in the same range from sending signals to each other,resulting in conflict.
    • RTS Threshold：为了防止在AP范围内却不在同一范围内的无线节点互相发送信号导致冲突.
  • DTIM Intval: The frequency at which the packet is transmitted wirelessly.
    • DTIM Intval：无线发送数据包的频率.
  • RTS Threshold: The distance of the device to transmit the signal (Unit:Km).
    • RTS Threshold：设备发射信号的距离（单位：km）.
  • DTIM Intval: The maximum number of devices that can be connected.
    • DTIM Intval：最大能连接的设备数.
  • Distance Setting: In a wireless network, the received signal must reach a certain threshold strength before it can be considered weak.
    • Disatnce Setting：在无线网络中，接收到的信号强度必须达到一定的阈值，才能被认定为弱信号.

作者：todaair01  创建时间：2023-05-27 09:32
最后编辑：todaair01  更新时间：2023-07-29 12:21